2012-02-07 10:21:21
Job Title: ES&H CoordinatorPay Rate: $16 per hourLocation: MelvillePosition Type: Contract through March 2012 (potential permanent position)Job Description • Identifies risks of all products in accordance with international, federal, state and local regulations. • Attends training and education seminars as appropriate to learn regulatory requirements. • Uses current ESH data to create reports and presentations. • Review material safety data sheets (MSDS). ... Read more »
2012-02-07 10:21:21
Adecco is looking for experienced candidates who can hand Solder wire to wire and wire to terminal pieces. This is a 10 hour shift, Monday to Thursday with possible overtime on Friday. Salary will depend on experience. ... Read more »
Inspector/Packer for OVERNIGHT SHIFTS in PENN YAN!
2012-02-07 10:21:21
JOIN US AT YATES COUNTY WORKFORCE DEVELOPMENT 417 LIBERTY STREET ON MONDAY, OCTOBER 31ST AT 1PM FOR OPEN INTERVIEWS! Large established company in Penn Yan seeks inspector/packers for OVERNIGHT 8 AND 12 HOUR SHIFTS!!! Will be inspecting product as it comes off the line for defects, coloring and imprinting. Must be able to lift up to 50 pounds. Ability to bend, lift and twist. Will stand on feet for 8 to 12 hours. An excellent long term potential temp to hire opportunity for qualified candidates! HS Diploma/GED required. At least two years current, solid, verifiable work history. Submit to pre-employment screening. Contact us to learn more about scheduled open interviews in the Penn Yan area! JOIN US AT YATES COUNTY WORKFORCE DEVELOPMENT ON MONDAY, OCTOBER 31ST AT 1PM FOR OPEN INTERVIEWS! ... Read more »
2012-02-07 10:21:21
Large established company in Penn Yan area seeks overnight quality auditor. Training to occur on day shift, however full time scheduled hours would be 8pm to 8am. Must have flexibility to work weekends and OT as required. Directly responsible for: Quality (a) Primarily responsible for completing start-up evaluation after a tool change. (b) Responsible for knowledge of Quality complaints. (c) Interpretation and enforcement of Customer Specifications. (d) Knowledge and understanding of sampling plans, i.e. MIL Std 105E. (e) Ability to effectively and thoroughly audit manufactured product per Silgan Quality Standards and/or Customer Specification levels. (f) Knowledge of NCR procedures. (g) Understanding the Exception Reporting process. Including, but not limited to the daily activity of filling out the form, placing it on the line, interpreting defect codes, cavity maps, and removal of form from line). (h) Full understanding of requirements of all paperwork and forms required per production order. (i) Acknowledge and understand the Silgan quality procedures and manufacturing standards. (j) Personal inspection of product quality. (k) Know all aspects of operation of Quality Equipment on floor and in Q/A Lab. (l) Foster an atmosphere of continuous improvement. (m) Investigate, evaluate and take appropriate action to maintain quality within established standards and guidelines. (n) Pursue opportunities to improve efficiency within the Quality Lab. Safety (a) Report any safety violations to Quality Manager. (b) Know and apply written safety procedures. (c) Inspect work areas and look for unsafe acts. (d) Enforce safety rules. Employee Relations (a) Regard fellow employees with respect, dignity, fairness, and honesty. (b) Administer both Company and local policies and procedures. (c) Ensure compliance with housekeeping and GMP standards. (d) Promote effective interactive communication with employees, between peers, staff, and management. (e) Maintain employee self esteem (f) Encourage employee participation (g) Effectively use verbal and written communications Other duties as assigned by supervisor. a) The job description above covers the most significant reoccurring duties for this position but does not preclude other special assignments. ... Read more »
2012-02-07 10:21:21
Looking for an experienced welder, must be able to MIG and TIG weld, read blueprints, have some fabrication skills. Will be tested on MIG and TIG skills when interviewed. Pay is based on experience. ... Read more »
2012-02-07 10:21:21
Local Wayne County manufacturer has machine operator positions available. If you have experience with Hardinge/Fenuc CNC mill/lathes we are looking for you. 2-5 years experience preferred, pay based on experience, 1st shift 7-3:30pm 2nd shift 3:30-12:00am, and 3rd shift 12:00-8:30am ... Read more »
2012-02-07 10:21:21
General labor, assemble, detail oriented, repetitive work, must be able to stand up to 8 hours ... Read more »
Adecco has B shift positions at Jamestown Containers!
2012-02-07 10:21:21
We have several excellent Temp-To-Hire opportunities at JAMESTOWN CONTAINERS for B shift MACHINE HELPERS! All positions are B shift positions with the hours of 2:30pm to 11:00pm with mandatory overtime hours including Saturdays. The position involves lifting corrugated cardboard boxes, loading the product into the machine and counting the items when they come off of the machine. Candidates must have very good math and measuring skills and must pay close attention to details! 2 years similar/related experience is preferred. A High School Diploma or GED is REQUIRED in order to be considered for this position. www.AdeccoUSA.com (Select Branch Code 5315) ... Read more »
ADECCO has 1st & 2nd shift jobs at COOPERVISION!!
2012-02-07 10:21:21
ADECCO is currently recruiting for 1st & 2nd shift long term contract and temp-to-hire positions at CooperVision in Henrietta! * These positions are 1st and 2nd shift. * Packaging, distribution, machine ops, etc. * Must be very detailed! * High school diploma or GED required. Solid work history & employment references required. Positions not on bus line. www.AdeccoUSA.com (Select Branch Code 5315) ... Read more »
ADECCO! Open recruit on Wed. 10/26 from 9AM-11AM 1330 Lexington Avenue.
2012-02-07 10:21:21
ADECCO has many openings with many temp-to-hire possibilities. Thermo Fisher Scientific, CooperVision, Jamestown Containers & other top-notch companies! A, B & C shifts. Henrietta, Penfield & Rochester locations. * 50+ Customer Service positions! $10-11/hour. 1st and 2nd shift. Busline accessible. . Packaging & picking/shipping in distribution center. Henrietta location. A & B shifts. . Machine ops and inspection. Prior optical experience a plus. Good manual dexterity required. Scottsville location. . Inspection/packaging positions for A, B & C shifts. Penfield and Fairport locations. . Long term Data Entry, Customer Service and Receptionist Dispatch, Collections positions! Solid Word, Excel and DE skills required. . Cleaners A & B shift - Must have prior commercial cleaning experience to include buffer and waxing machines. . Fork Truck - C/B/A rotations - Dispensing and packaging of toner. Standing for long periods of time. * Several excellent Temp-To-Hire opportunities at JAMESTOWN CONTAINERS for B shift MACHINE HELPERS! Positions are B shift positions with the hours of 2:30pm to 11:00pm with mandatory overtime hours including Saturdays. The position involves lifting corrugated cardboard boxes, loading the product into the machine and counting the items when they come off of the machine. . Clean room positions - A/C rotation. Must wear full uniform to work in this clean room. Will be inspecting small parts under a microscope, performing semiconductor package assembly and testing operations to include semiconductor wire bonding, coating and use of laser saw and die/glass cutter. Must have excellent attention to detail and a good quality record. Prior clean room experience is a plus. Most of these positions require a High School diploma or a GED. Most positions not on bus line. ADECCO: Wednesday 10/26 from 9AM to 11AM at 1330 Lexington Avenue. PLEASE BRING RESUME AND EMPLOYMENT REFERENCES Please apply online at: www.AdeccoUSA.com (Please select Branch Code 5315 for 1330 Lexington Avenue) If you're unable to attend, please complete an online application today on our website: www.AdeccoUSA.com (Please select Office 5315) ... Read more »
2012-02-07 10:21:21
Tired of the same old job? Looking to learn a NEW skill in the Metals trade? We are looking to hire you! Qualification: *HS/GED *Solid work history *Manufacturing experience (prefered) *Ability to use micrometer/precise tools *Read Blue prints *Ability to work in fast paced/repetative enviroment *Machine experience (prefered) *Previous CNC is a plus! Applicant must be able to pass measurement test and submit to pre-employment screening. ... Read more »
2012-02-07 10:21:21
2nd and 3rd shift positions available. Must be able to train on 1st shift and then switch out to designated shift.Must be flexible for overtime hours. The position will be located in Elmira area. MACHINE OPERATOR NEEDED. MUST HAVE PREVIOUS EXPERIENCE WITH MEASUREMENT TOOLS AND BLUE PRINT READING. ABLE TO FOLLOW DIRECTIONS AND TAKE ORDERS. MUST MEET HIRING REQUIREMENTS. ... Read more »
2012-02-07 10:21:21
Looking for reliable, hard working individuals for local factory in Spencer, NY area. Position consists of working in an assembly line with dry ingredient product. Shift runs M-F 6am -2:30pm. Must meet hiring requirements. ... Read more »
2012-02-07 10:21:21
This position will run M-TH 3pm - 1:30am. Attendance is extremely important! Duties include arranging cars for detail production line. Must be 21, able to drive all different types of vehicles, have a valid driver's license, and the ability to handle 5 speed/stick vehicles accurately. This is a fast paced work environment must be able to keep pace. This position includes working directly in the weather conditions. This position requires knowledge of car maintenence. This is a long term position and candidates must meet all hiring requirements. ... Read more »
2012-02-07 10:21:21
This is a temporary position, approximately 4-6 weeks in the Elmira area. Schedule will be Monday thru Friday 7a.m. - 4p.m. with some MANDATORY OVERTIME which will include some Saturdays. Previous experience is necessary. Must be able to read and interpret blue prints, sketches and written instructions from engineers and then assemble parts or products based on these specifications. Must know how to use measurment tools, perform rework and repairs on manufactured equipment and products. Must also meet all hiring requirements. ... Read more »
2012-02-07 10:21:21
Supervise all production operations within a generic pharmaceutical company. Responsible for product quality and efficiency of operation. Responsible for scheduling all manufacturing operations, employees, inventory, raw materials and labeling. In addition, this supervisor will be responsible for the maintenance of the equipment and facility. Will maintain SOP's and safety to ensure employees are trained and in compliance. Will prepare operation, cost and material control reports. ... Read more »
2012-02-07 10:21:21
Our client, an up and coming company that thrives on innovation and customer satisfaction is looking for people to help assmemble items. Hours available are Day shift: 7:45am- 4:45pm and Evening shift: 5:30pm- 2:30am weekends will be required. Job duties include but not limited to stocking, assembly and facilities in a Production atmosphere. No experience is necessary but the right candidate must be dependable with a willingness to learn. Also have great attention to detail. ***Please note this is a seasonal position and will continue on an as needed basis through December.*** ... Read more »
Machine Operator- 1st & 2nd Shift
2012-02-07 10:21:21
Machine Operator Adecco is recruiting for several Machine Operator positions. There are 1st and 2nd shifts available. Ideal candidates must have machine operation experience as well as experience working with sheet metal. Responsibilities: -Operate sheet metal machine -Keep machinery, equipment and aisles neat and clean -Perform and/or report any damage to machinery or equipment -Learn and perform manufacturing processes and machine operation as required Requirements: -Sheet metal experience -Machine operator experience -Excellent hand-eye coordination -Strong attention to detail -HS Diploma/GED Position is CDTA accesesible EOE ... Read more »
2012-02-07 10:21:21
Local manufacturing facility is looking for candidates to assemble, inspect and pack products from an assembly line. Must have good manual dexterity and basic math and reading skills. Positions are available on First Shift. Will provide training for the right candidate! ... Read more »
2012-02-07 10:21:21
Line operator for electroplating process facility. Will set up the initial run of the machine and verify correct plating per station by inspecting final plated materials. Previous Industrial Manufacturing experience helpful. Openings are available on all shifts. ... Read more »